服务热线: 400-117-8816
           13406879330

扭剪扳手,扭剪螺栓专用扳手,扭剪77779193永利首页网址,扭剪枪生产厂家

当前位置:首页>技术文献电动扭剪扳手你了解多少?

电动扭剪扳手你了解多少?

来源:日期:2023-04-24 发布人:admin

77779193永利首页网址主要应用于钢结构安装行业,专门安装钢结构高强螺栓,高强度螺栓是用来连接钢结构接点的,通常是用螺栓群的方式出现。

Electric wrenches are mainly used in the steel structure installation industry, specifically to install high-strength bolts for steel structures. High strength bolts are used to connect steel structure joints, usually in the form of bolt groups.
高强螺栓按施工工艺分为扭剪型高强螺栓和大六角高强螺栓。其连接性能和本身的力学性能都是相同的,仅外形不同,都是以扭矩大小确定螺栓的轴向力大小。
High strength bolts are divided into torsion shear type high strength bolts and large hexagonal high strength bolts according to construction technology. The connection performance and mechanical properties of the bolt are the same, with only different appearances. The axial force of the bolt is determined by the torque.
扭剪扳手
紧固高强螺栓必须先初紧、后终紧,而初紧一般是紧扭矩的一半,终紧就要紧固到扭矩值。大六角高强螺栓和普通螺丝外观相似,初紧可以用冲击扳手等,终紧必须用定扭矩77779193永利首页网址;而扭剪型高强螺栓前头有一段梅花头,初紧可以用冲击扳手,终紧必须用扭剪型77779193永利首页网址,电动扭剪扳手可以比较准确地控制拧紧扭矩,利用螺栓定扭矩,当扳手达到一定扭矩时即可剪断螺栓的梅花头部分。其扭矩精度和轴向拉力是靠螺栓的定扭矩V型切口来保证的。
Tightening high-strength bolts must first be initially tightened and then finally tightened. The initial tightening is usually half of the tightening torque, and the final tightening must be tightened to the maximum torque value. The appearance of large hexagonal high-strength bolts is similar to that of ordinary screws, and impact wrenches can be used for initial tightening, while fixed torque electric wrenches must be used for final tightening; The front end of the high-strength bolt with torsion shear type has a section of plum blossom head. The initial tightening can be done with an impact wrench, and the final tightening must be done with a torsion shear type electric wrench. The electric torsion shear wrench can accurately control the tightening torque and use the bolt to set the torque. When the wrench reaches a certain torque, the plum blossom head part of the bolt can be cut off. The torque accuracy and axial tension are ensured by the fixed torque V-notch of the bolt.
本文由扭剪扳手提供帮助,更多的相关内容请点击希望本文能够为您带来帮助,感谢您的阅读!
This article is assisted by a torsion wrench. For more related content, please click on I hope this article can be helpful to you. Thank you for reading!