◎6bar压缩空气，**功率下耗气量600L/min；
The air consumption is 600L / min with 6bar compressed air;
◎单转速巧妙设计，设计紧凑，重量轻便，速度快捷，便携好；
Single speed ingenious design, compact design, light weight, fast speed and good portability;
◎功率强大而噪音极低，静音效果极好，小于80dBA；
The power is strong and the noise is very low, and the mute effect is excellent, less than 80dba;
◎通过气源处理器调节压力实现扭矩控制；
The torque control is realized by adjusting the pressure through the air source processor;
◎扭矩精度达±5%，重复精度±1%；
The torque accuracy is ± 5% and the repeatability accuracy is ± 1%;
◎紧凑行星设计，体积小，更大扭矩/重量比，稳定性极好；
Compact planetary design, small volume, higher torque / weight ratio, excellent stability;
◎4位式功率管理控制，扭矩跨度更大；
4-bit power management control, longer torque span;
◎7-叶片式高性能气动马达，效率高，使扳手可持续输出无冲击扭矩；
7-blade type high-performance pneumatic motor, high efficiency, so that the wrench can continuously output no impact torque;
◎反向偏压马达设计提供反转模式的**功率和扭矩，符合螺栓拆卸时更大扭矩要求；
The reverse bias motor is designed to provide * * power and torque in reverse mode, which can meet the requirements of higher torque during bolt disassembly;
◎单手操作的正/反转按钮，触摸式开关阀；
One hand operated forward / reverse button, touch type on-off valve;
◎杰出率的连续运行性能，可满足高负荷作业。
Excellent and efficient continuous operation performance, which can meet high load operation.
◎工业级设计，连续使用能力强，完全可满足生产线装配/工程施工安装/设备检修的需求，从而减轻劳动强度，提高工作效率
Industrial grade design, strong continuous use ability, fully meet the needs of production line assembly / engineering construction installation / equipment maintenance, so as to reduce labor intensity and improve work efficiency
