为避免使用电动扭剪扳手时发生火灾、触电、人身伤害、机械伤害等事故，使用电动剪切钳时须严格遵守以下规定。

To avoid accidents such as fire, electric shock, personal injury, and mechanical injury when using electric shear wrenches, the following safety regulations must be strictly followed when using electric shear pliers.

1.电源电压不得超过77779193永利首页网址铭牌上额定电压的10%。

1. The power supply voltage shall not exceed 10% of the rated voltage on the nameplate of the electric wrench.

2.扳手使用的电源插座须与扳手上的电源插头匹配，输入侧的电源（电缆托架）须配备漏电保护器。

2. The power socket used for the wrench must match the power plug on the wrench, and the power supply (cable tray) on the input side must be equipped with a leakage protector.

3.电动扭剪扳手的本体、电线和漏电保护器须完好无损。

3. The body, wires, and leakage protector of the electric torsion wrench must be intact and undamaged.

4.高空作业时，扳手须系上绳。

When working at heights, the wrench must be fastened with a safety rope.

5.不允许在潮湿或雨天使用，或在储存易燃易爆气体的地方使用。

5. It is not allowed to use it in damp or rainy days, or in places where flammable and explosive gases are stored.

6.使用时应正确选择合适的套筒。

6. When using, the appropriate sleeve should be selected correctly.

7.按照要求穿戴工作服、帽和带，以在操作过程中保持身体平衡。

7. Wear work clothes, safety helmets, and seat belts as required to maintain body balance during operation.

8.不要拉动扳手上的钢丝，也不要通过拉动钢丝来拉动插头。

8. Do not pull the wire on the wrench, and do not pull the plug by pulling the wire.

9.使用后，及时拔掉电源插头。

9. After use, promptly unplug the power plug.