定期清洁是维护和保养电动扭矩扳手简单也有效的保养方式。使用电动扭矩扳手一段时间后，应该对其进行定期清洁。，应该将扳手的表面灰尘和污垢干净，可以使用软布或者刷子进行擦拭。其次，应该清理扳手内部各个部件的杂质和污物。

Regular cleaning is a simple and effective way to maintain and maintain electric torque wrenches. After using an electric torque wrench for a period of time, it should be cleaned regularly. Firstly, the surface of the wrench should be cleaned of dust and dirt, which can be wiped with a soft cloth or brush. Secondly, impurities and dirt should be removed from various components inside the wrench.

其次是润滑保养。为了保证电动扭矩扳手的正常运转，应该经常给其润滑。通常，每使用一段时间，就应该给扳手内部各个关键部件加上适量的润滑油。当然，在加润滑油之前，应该先清洗干净相关部位。

Next is lubrication and maintenance. To ensure the normal operation of the electric torque wrench, it should be lubricated regularly. Usually, an appropriate amount of lubricating oil should be added to the key components inside the wrench after each period of use. Of course, before adding lubricating oil, the relevant parts should be cleaned thoroughly.

再次是避免过载。为了延长电动扭矩扳手的使用寿命，使用时应该避免过载。因为长期以来的频繁过载会损伤扳手内部驱动部件，导致扳手失去原有的使用效果或者损坏。

Once again, it is to avoid overload. To extend the service life of electric torque wrenches, overloading should be avoided during use. Because frequent overloading over a long period of time can damage the internal driving components of the wrench, resulting in the wrench losing its original effectiveness or being damaged.

后就是存储保养。当电动扭矩扳手暂时不需要使用时，应该将其存放在防潮、防尘、通风的地方。同时，应该定期对其进行检查和保养，避免长期不用导致生锈和老化。

Next is storage and maintenance. When an electric torque wrench is temporarily not needed, it should be stored in a moisture-proof, dust-proof, and ventilated place. At the same time, it should be regularly inspected and maintained to avoid rusting and aging caused by long-term use.

本文由扭剪77779193永利首页网址友情奉献.更多有关的知识请点击:真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from the torsion shear electric wrench. For more related knowledge, please click: Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned